Does the network allow all joins? Or is waiting for current nodes to get to a certain capacity?
6 Likes
It was like this with main too.
So it is fine most likely.
5 Likes
Yep, all nodes can join, for this test-net we’ve removed all restrictions on node joins.
5 Likes
My node joined.
But this time with small amount of chunks (11) and small amount of RAM usage (35 MB).
4 Likes
The network is not accepting nodes right now. Retrying after 30 seconds. Node log path: /root/.safe/node/local-node/
Idk but for me it worked when I move file to current directory, before that is give me error that file doesnt exist, and now if I try to move this file to desktop then nothing was happened (I thinked system finding this file, and I hit enter) now I see:
safe files put test2.txt
Error:
0: ←[91mFailed to connect: ConnectionError: Failed to connect to the SAFE Network: NetworkContacts(“failed to make initial contact with network to bootstrap to after 3 attempts, result in last attempt: Err(NoResponse { msg_id: MsgId(843f…2d8c), peers: [Peer { name: 07e23a(00000111)…, addr: 64.227.42.22:49976 }, Peer { name: 178d5d(00010111)…, addr: 188.166.151.208:42430 }, Peer { name: 10cbf7(00010000)…, addr: 165.22.119.224:42907 }] })”)←[0m
Location:
←[35msn_cli\src\operations\auth_and_connect.rs←[0m:←[35m83←[0m
Backtrace omitted. Run with RUST_BACKTRACE=1 environment variable to display it.
Run with RUST_BACKTRACE=full to include source snippets.
and if I try command again it gives me error that file doesnt exist.
3 Likes
Looks like it do not accept files also.
d:\SN>safe networks switch main2
Switching to 'main2' network...
Successfully switched to 'main2' network in your system!
d:\SN>safe files put 85329768_p0.jpg
FilesContainer created at: "safe://hyryyryszdg7p9jqz7u3qhxfcq86pg6i3zbtkcmwuc6ts
8b8g975x1juywwnra?v=hnrijhg7qx435iejzzjm1i5oc3qgw3s3b36ej9r7wwe8nmgxjnfey"
+---+-----------------+---------------------------------------------------------
-----------------------------------------+
| E | 85329768_p0.jpg | <ClientError: Timeout after 90s when awaiting command AC
K from Elders for data address 2143bc..> |
+---+-----------------+---------------------------------------------------------
-----------------------------------------+
5 Likes
37kB jpg put failed with:
Error:
0: ClientError: Timeout after 90s when awaiting command ACK from Elders for data address 25afef..
1: Timeout after 90s when awaiting command ACK from Elders for data address 25afef..
Location:
sn_cli/src/subcommands/files.rs:213
Backtrace omitted. Run with RUST_BACKTRACE=1 environment variable to display it.
Run with RUST_BACKTRACE=full to include source snippets.
real 3m20,485s
user 0m0,393s
sys 0m0,060s
2 Likes
I’m not sure exactly how you’re trying to use safe, but if you do something like safe files put test2.txt that’s a relative file reference and it needs to be in your current directory. Otherwise you would need to specify the full, absolute path to the file. That’s not an issue that’s unique to safe. All programs behave that way.
7 Likes
Same
➜ ~ safe files put 17568.jpeg
Error:
0: ClientError: Timeout after 90s when awaiting command ACK from Elders for data address c17679..
1: Timeout after 90s when awaiting command ACK from Elders for data address c17679..
Location:
sn_cli/src/subcommands/files.rs:213
Backtrace omitted. Run with RUST_BACKTRACE=1 environment variable to display it.
Run with RUST_BACKTRACE=full to include source snippets.
2 Likes
Thank you - I get the same so all good on that aspect.
3 Likes
Tried again to put the 37kB jpg, different error:
Error:
0: Failed to connect: ConnectionError: Failed to connect to the SAFE Network: NetworkContacts("failed to make initial contact with network to bootstrap to after 3 attempts, result in last attempt: Err(NoResponse { msg_id: MsgId(8e86..e7ad), peers: [Peer { name: 2f6116(00101111).., addr: 65.109.139.177:41794 }, Peer { name: 673348(01100111).., addr: 138.68.162.81:46787 }, Peer { name: 482043(01001000).., addr: 161.35.162.137:49074 }] })")
4 Likes
Glad it’s not just me… was begining to wonder that with the forced OS upgrade to get new libbin, I’d forgotten the ports perhaps for this… but then should not be for put and get.
$ safe files put ./joker.gif
date
Error:
0: Failed to connect: ConnectionError: Failed to connect to the SAFE Network: NetworkContacts("failed to make initial contact with network to bootstrap to after 3 attempts, result in last attempt: Err(NoResponse { msg_id: MsgId(ce5e..1f31), peers: [Peer { name: 10cbf7(00010000).., addr: 165.22.119.224:42907 }, Peer { name: 482043(01001000).., addr: 161.35.162.137:49074 }, Peer { name: 178d5d(00010111).., addr: 188.166.151.208:42430 }] })")
Location:
sn_cli/src/operations/auth_and_connect.rs:83
Backtrace omitted. Run with RUST_BACKTRACE=1 environment variable to display it.
Run with RUST_BACKTRACE=full to include source snippets.
4 Likes
I’m not having much luck here as well
3 Likes
Just want to add a caveat to how I voted in the poll. I am not currently able to join in the test nets for lack of an M1 chip Mac. I have a (recently) outdated Mac but hoping to change that soon!
Not suggesting outdated hardware needs supporting either as these older models genuinely become obsolete just from OS upgrades.
I hope to join in soon.
4 Likes
You still in that house of ill-repute in Baku?
2 Likes
The new testnet seems to have split, perhaps the reason why it’s not allowing more nodes to join:
$ safe networks sections
Network sections information for default network:
Read from: /root/.safe/network_contacts/default
Genesis Key: PublicKey(0d58..9171)
Sections:
Prefix '0'
----------------------------------
Section key: PublicKey(1687..95fa)
Section keys chain: [(PublicKey(0d58..9171), 18446744073709551615), (PublicKey(05ac..8bdd), 7), (PublicKey(1821..9904), 0), (PublicKey(1687..95fa), 5), (PublicKey(042e..c837), 1), (PublicKey(0dca..9790), 4), (PublicKey(1112..7345), 2), (PublicKey(14b1..b3b1), 6)]
Elders:
| XorName | Age | Address |
| 07e23a.. | 5 | 64.227.42.22:49976 |
| 10cbf7.. | 5 | 165.22.119.224:42907 |
| 178d5d.. | 5 | 188.166.151.208:42430 |
| 2f6116.. | 5 | 65.109.139.177:41794 |
| 482043.. | 5 | 161.35.162.137:49074 |
| 673348.. | 5 | 138.68.162.81:46787 |
| 738018.. | 255 | 134.209.16.34:12000 |
Prefix '1'
----------------------------------
Section key: PublicKey(0757..36e3)
Section keys chain: [(PublicKey(0d58..9171), 18446744073709551615), (PublicKey(05ac..8bdd), 7), (PublicKey(1821..9904), 0), (PublicKey(042e..c837), 1), (PublicKey(0757..36e3), 5), (PublicKey(0dca..9790), 3), (PublicKey(1112..7345), 2), (PublicKey(14b1..b3b1), 6)]
Elders:
| XorName | Age | Address |
| 970591.. | 5 | 209.97.183.9:49975 |
| 9d6557.. | 5 | 142.93.39.249:49476 |
| 9f31fa.. | 5 | 161.35.44.21:58269 |
| b4d09d.. | 5 | 209.97.179.216:41622 |
| bf3f89.. | 5 | 161.35.36.63:39294 |
| ccb664.. | 5 | 161.35.44.169:43499 |
| e6d9a9.. | 5 | 161.35.172.200:39601 |
8 Likes
Thats strange, I thought we were going for one big section?
Edit: I still see only one section
willie@gagarin:~$ safe networks check
Checking current Network Map...
'main2' network matched!
The default Network Map matches 'main2' network as per current config
willie@gagarin:~$ safe networks sections
Network sections information for default network:
Read from: /home/willie/.safe/network_contacts/default
Genesis Key: PublicKey(0d58..9171)
Sections:
Prefix ''
----------------------------------
Section key: PublicKey(0dca..9790)
Section keys chain: [(PublicKey(0d58..9171), 18446744073709551615), (PublicKey(05ac..8bdd), 6), (PublicKey(1821..9904), 0), (PublicKey(042e..c837), 1), (PublicKey(0dca..9790), 3), (PublicKey(1112..7345), 2), (PublicKey(14b1..b3b1), 5)]
Elders:
| XorName | Age | Address |
| 482043.. | 5 | 161.35.162.137:49074 |
| 673348.. | 5 | 138.68.162.81:46787 |
| b4d09d.. | 5 | 209.97.179.216:41622 |
| bf3f89.. | 5 | 161.35.36.63:39294 |
| ccb664.. | 5 | 161.35.44.169:43499 |
| e6d9a9.. | 5 | 161.35.172.200:39601 |
| 738018.. | 255 | 134.209.16.34:12000 |
5 Likes
No iv bailed out of Baku on the bus from Edinburgh to Glasgow right now been awake for a day and a half and trying to see straight enough to use juice for this test net 
1 Like
I got this too.
I am using a vpn, but also have a filewall on linux mint.
Taking it all down and trying again.
Anyone know what port I need to keep open?
2 Likes